SYN-R5 Midi Pedal
  • SYN-R5 Midi Pedal
  • SYN-R5 Midi Pedal
  • SYN-R5 Midi Pedal
  • SYN-R5 Midi Pedal
  • SYN-R5 Midi Pedal

SYN-R5 Midi Pedal

$129.99

The R5 pedal is essentially a 5 button MIDI pedal that is preset to send program change commands 1 through 5 on MIDI channel 1 - specifically designed to control your SYN-2 (rack mount hardware unit)

Your SYN-2 should come preprogrammed to respond to modules channels 1 through 4 on buttons 1 through 4 of the footswitch. Button 5 will be assigned to BYPASS. You can change/assign any module channel or bypass to be on any buttons you wish by following the programming instructions of the SYN-2. The R5 pedal can operate from any power supply that puts out 9 to 12 volts AC or DC and has a current rating of at least 50 milliamps.

If your midi pedal did not come programmed already, 

To program the R5 (or any of the SYNERGY FOOT SWITCHES), do the following: 

1. Make sure your MIDI controller is connected to your SYNERGY DEVICE's MIDI input jack 

2. Select a preset on the MIDI controller 
3. Using the channel select button on the SYNERGY HARDWARE, select the module channel (or bypass) you wish to have come on when the footswitch preset is selected. 
4. Hold the channel select button until the bypass LED flashes. This should take about 3 seconds. Repeat steps 2 through 4 above for each controller preset you wish to store. The next time you select one of the programmed presets, the SYNERGY DEVICE will automatically switch to the desired channel.
Image

Stay Connected To Synergy